Electric Motor

HB-01 Pneumatic Hairpin Bender

Pneumatic bender for the egde-wise bending of copper strip. Simple set up and operation.

  • Pedestal mounted
  • Lever operated
  • Supplied with three forming pins for diameters 6-11 mm
  • Bending angles up to 180 degrees
  • Very quick change over times
  • Pneumatic operation
  • 1183 mm high x 1143 mm wide x 356 mm deep.
  • maximum coil cross section 25 mm x 3.5 mm
  • Minimum evolute: 6.3 mm internal diameter
  • Maximum evolute: 25 mm