HB-01 Pneumatic Hairpin Bender
Pneumatic bender for the egde-wise bending of copper strip. Simple set up and operation.
- Pedestal mounted
- Lever operated
- Supplied with three forming pins for diameters 6-11 mm
- Bending angles up to 180 degrees
- Very quick change over times
- Pneumatic operation
- 1183 mm high x 1143 mm wide x 356 mm deep.
- maximum coil cross section 25 mm x 3.5 mm
- Minimum evolute: 6.3 mm internal diameter
- Maximum evolute: 25 mm